Constant Force Springs: What Nearly Constant Pull Means

A constant force spring is designed to provide a relatively flat force response over a specified working range. It is commonly made as a coiled strip that resists being extended. The useful output is associated with the strip’s change in curvature as it leaves the coil.

Why a simple proportional-force explanation is misleading

The familiar expression that force increases in proportion to extension is useful for an ideal linear spring. It does not describe the intended overall force-versus-travel response of a constant force spring. The material still deforms elastically, but the spring geometry and operating arrangement produce a different output characteristic.

Where “nearly constant” needs qualification

Starting motion, reversing direction and approaching travel limits can affect observed behavior. Installation friction and alignment also influence force measurements. A single reading at one position cannot demonstrate the response throughout the intended stroke.

What the user feels is a system result

In a guided mechanism, the spring force combines with the moving load and resistance from other components. A near-flat spring output therefore does not by itself guarantee smooth movement, a fixed return speed or the ability to stop at any position. Those requirements should be checked in the complete assembly.

A practical way to describe the requirement

Explain where the mechanism feels too heavy, returns unexpectedly or behaves differently in opposite directions. Record the assembly revision and the conditions under which this happens. The designer can then distinguish the required spring characteristic from issues in routing, guides or motion control.

For potential uses and their limits, see application considerations. Project-specific performance data should be reviewed privately.

Scroll to Top